Daikin R-410A Service Manual page 366

Disassembly and Maintenance
1.16.4 Removal of PC Board
1
Warning
Procedure:
Step
Remove the outer panels
according to the procedure
for "Removal of Electrical
Parts Box".
1 Disconnect the front side
wiring connector
3 connected to the PC
board.
2 Disconnect the PC board
from the tabs by pushing
it inward. Draw the PC
board out partly and
disconnect the remaining
5 5
connectors.
3 Completely remove the
PC board.
5–126
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
ESIEN05-04
Points
The tape holding the electrical
parts box and PC board is for
transport, and is unnecessary
when reinstalling.
Part 5 – Disassembly and Maintenance