Daikin R-410A Service Manual page 279

ESIEN05-04
Step
2 Removing the drain pump
1 Cut the clamp material.
2 Pull the drain hose out.
3 Remove the 3 screws
on the drain pump
mounting plate.
4 Remove the 2 mounting
screws on the drain
pump.
5 Displace the drain pump
sideward to remove it.
3 Removing the float switch
1 Reverse the drain pump
mounting plate which
was removed according
to the procedure
described on the
preceding page.
2 Remove the 1 screw,
displace the float switch
sideward, then
dismount the float
switch.
Part 5 – Disassembly and Maintenance
Procedure
Drain pump
Disassembly and Maintenance
Points
When removing the drain
Clamp material
pump, cut the following clamp
materials.
Clamp material securing the
drain pump lead wire to the
drain pump mounting plate.
Clamp material bundling the
drain pump lead wire and float
switch lead wire.
When removing the float
switch, cut the following clamp
materials.
Clamp material securing the
drain pump lead wire to the
drain pump mounting plate.
Clamp material bundling the
drain pump lead wire and
float switch lead wire.
1
3
5 5
5–39