Collecting Event Log - NEC BladeServer Express5800 Series User Manual

COLLECTING EVENT LOG

This section describes how to collect the event logs of the CPU blade.
IMPORTANT:
If a STOP error, system error, or stall occurs, follow the procedure
below after restarting the system.
Restarting the system due to an error may display a message
indicating insufficient virtual memory. Ignore this message and
proceed. Restarting the system may result in dumping improper
data.
NOTE: If two CPU's with different revision levels are installed on the
server, the following message may appear in the System Log of the
Event Viewer. However, it is not a problem for normal system
operation:
1.
Click [Management Tool] – [Event Viewer] in the Control Panel.
2.
Select the the log type to collect.
[Application Log] collects events related to the installed applications. [Security Log]
collects the events related to security. [System Log] collects the events related to the
Windows system.
3.
Click [Save as...] in the [Run] menu.
4.
Enter the file name of the log in the [File Name] box.
5.
Select the type of the log file you want to save in the [File Type] list box and click [OK].
For more information, refer to Windows Online Help.
Troubleshooting 8-19