Powering On The Machine; Power Save - Xerox WorkCentre 3315DN User Manual

Powering on the Machine

The On/Off switch and the power cable socket are at the rear of the machine.
AC Power Cord
1. Connect the
power outlet. The power cord must be plugged into a
grounded power socket.
ON/OFF
2. Press the

Power Save

This machine contains advanced energy conservation
technology that reduces power consumption when it is not in
active use.
• When the printer does not receive data for an extended
period of time, the Power Save mode becomes active and power consumption is automatically
lowered.
• Press the Power Save button to select the Power Save mode immediately.
To restore the machine to a normal state, press any button.
Note: When in Power Save mode, the machine will not recognize when a USB Memory Device is
inserted into the USB port. Press any button to restore the machine to a normal state and reinsert
the USB Memory Device into the port.
Powering off the Machine
There are two ways to switch the machine off:
Press the ON/OFF switch to the (O) position.
•
• Press the Power Save button and select Power Down and then OK.
1 to the machine and a
switch to the ON (I) position.
2
Xerox WorkCentre 3315DN/3325DN/3325DNI

Powering on the Machine

2
1
11
User Guide