Xerox WorkCentre 3315DN User Manual page 66

E-mail Procedure
6. When Ready to E-mail appears you can add or edit the recipient list, press Menu to select
additional features or press Start to scan your originals.
• To add additional recipients, highlight Add Another Address and enter the address required.
• To edit or delete recipients, use the up/down arrows to highlight the address requiring editing
or deleting and press OK. Use the left arrow key to delete characters and then edit the
address. To delete the address, press the down arrow key to highlight Delete and select OK.
Select the Features
Various features can be selected for your e-mail job. The most common features are selected from the
control panel. Once you have made a selection, press Back to return to the Ready screen.
1. The following features are available through the Menu button:
Note: Some of the following options may be unavailable depending on your machine
configuration.
Original Size
Original Type
Resolution
Output Color
Lighten/Darken
Contrast
2. Press the up/down arrows until the feature you want highlights and press OK. Select the setting
required and press OK.
For information about each of the options refer to
Start the Job
Press the Start button.
1.
The images are scanned and sent to the e-mail address or addresses entered.
66 Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
Use to set the size of the image being scanned.
Used to improve the image quality by selecting the document type for
the originals.
Sets the image resolution. A higher resolution increases the file size.
Sets the color mode of the scanned image.
Provides manual control to adjust the lightness or darkness of the
scanned images.
Use to increase or decrease the contrast between black and white
images.
E-mail Options on page 68.