7.
Continue customizing the Machine Settings as required, then press Stop to return to Ready
mode.
Paper Setup
After loading paper in the paper tray, set the paper size and type using the control panel. These
settings will apply to Copy and Fax modes.
1.
Press Machine Status on the control panel.
2.
Press the up/down arrows to highlight System Setup and press OK. If necessary, enter the
Administrator's Password using the keypad. Refer to
instructions.
3.
Press the up/down arrows to highlight Paper Setup and press OK.
The following Paper Setup options and settings are available:
Note:
* indicates the factory default setting.
Option
Paper Size
Description
This is the most common paper size
that will be used in the machine and is
the size the machine will feed if a
specific size is not selected.
Accessing the Setup Options
•
Tray 1
•
Tray 2
•
Bypass Tray
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Setup
on page 154 for
Settings
Letter *
•
•
Legal
•
Oficio
•
US Folio
•
A4
•
ISO B5
•
JIS B5
•
Executive
•
A5
• A6
• Custom
•
Letter *
•
Legal
•
Oficio
•
US Folio
•
A4
•
ISO B5
•
JIS B5
•
Executive
•
A5
•
A6
•
Monarch Env
•
DL Env
•
C5 Env
•
C6 Env
•
No.10 Env
•
Postcard
•
Custom
173
User Guide