Media Output Locations - Xerox WorkCentre 3315DN User Manual

Media Output Locations

The machine has two output locations:
• Output tray (face down)
sheets of 20 lb (80 g/m²) paper.
• Rear door (face up)
The machine sends output to the output tray by default. If special media such as envelopes print out
with wrinkles, curl, creases or black bold lines, the rear door should be used for the output. Open the rear
door and keep it open while printing one sheet at a time.
Note: The rear door output can only be used for simplex jobs. Duplex printing with the rear door
open will cause paper jams.
Using the Output Tray
The output tray collects printed paper face down, in the order in which the sheets were printed. The
output tray should be used for most jobs. When the output tray is full, a message displays on the
control panel.
1 up to a maximum of 150
one sheet at a time.
2
1
Xerox WorkCentre 3315DN/3325DN/3325DNI
Media Output Locations
2
43
User Guide