Loading Paper - Xerox WorkCentre 3315DN User Manual

Loading Paper

Loading Paper
One paper tray and a bypass tray are standard on your machine. Paper tray 2 is available to purchase
as an option.
Various media sizes and types can be used in the trays. For more media specifications, refer to
Specifications on page 150.
Preparing Paper for Loading
Before loading paper into the paper trays, flex or fan the
edges of the paper stack. This procedure separates any sheets
of paper that are stuck together and reduces the possibility of
paper jams.
Note: To avoid unnecessary paper jams and misfeeds do
not remove paper from its packaging until required.
Loading Paper Tray 1 and Paper Tray 2 (optional)
The paper level indicator on the front of tray 1 and the
optional tray 2 shows the amount of paper currently left in
the tray. When the tray is empty, the indicator is completely
lowered as shown in the illustration:
shows empty.
2
Using the instructions provided below, load paper into the
machine. Paper tray 1 can hold up to 250 sheets and paper
tray 2 (optional) can hold up to 520 sheets of 20 lb (80 g/m²)
paper. For more media specifications, refer to
Specifications on page 150.
1. Pull out the paper tray and load paper into the tray, print
side down. Do not fill above the Maximum Fill line
indicated by the symbol
144 Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
shows full,
1
Media
.
Media
1
2
1 2