Priority Send - Xerox WorkCentre 3315DN User Manual

Using Fax Send Options

Priority Send

This function is used when a high priority fax needs to be sent ahead of other fax jobs in memory. The
original is scanned into memory and immediately transmitted when the current operation is finished.
In addition, a Priority Send fax will interrupt a Multi Send fax being sent. The fax is interrupted between
destinations, for example after the transmission to destination A ends and before the transmission to
destination B begins, or between redial attempts.
1. Press Fax on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrows to highlight Priority Send and press OK.
4. Enter the number of the receiving fax machine and press OK.
You can select speed dial numbers or a group dial number using the Address book button. For
details, see Address Book
5. Enter the job name you want and press OK. If you do not want to assign a name, skip this step.
For details on how to enter alphanumeric characters, refer to
6. Load originals and press Start.
If an original is placed on the document glass, select Yes at the Another Page? prompt. Load
another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine scans and sends the fax to the destinations entered.
82 Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
on page 86.
Using the Keypad on page 13.