Setting Up Drpd Mode - Xerox WorkCentre 3315DN User Manual

Fax Setup
Option
RCV Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Mode
2-Sided Print
Local Drive Saving
(3325DN/DNI only)

Setting up DRPD Mode

To set up the DRPD mode:
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight Fax Setup and press OK. If necessary, enter the
Administrator's Password using the keypad. Refer to
instructions.
3. Press the up/down arrows to highlight Receiving and press OK.
4. Press the up/down arrows to highlight Receive Mode and press OK.
168 Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
Description
This code allows you to initiate
fax reception from an extension
phone plugged into the EXT
socket on the back of the
machine. If you pick up the
extension phone and hear fax
tones, enter the code. It is preset
to *9* at the factory.
When receiving a fax containing
pages longer than the paper
loaded in the paper tray, the
machine can reduce the size of
the image to fit the size of the
paper loaded in the machine.
Note: With this feature set to
Off, the image will be divided
and printed actual size on two or
more pages.
Discards a specific length from
the end of the received fax.
Allows numbers that have been
sent to the device to be selected
as junk fax numbers.
Enables a user to use a single
telephone line to answer several
different telephone numbers.
You can set the machine to
recognize different ring patterns
for each number.
Prints faxes on both sides of the
paper either in a portrait or
landscape orientation.
Stores received faxes in the
common box on the local drive.
Accessing the Setup Options
Settings
• Enter code between 0 - 9
9 *
• On *
• Off
• 00-30
20 *
• On
• Off *
• Waiting Ring
• Off *
• Flip on Long Edge
• Flip on Short Edge
• Off *
• On
on page 154 for