Powering On The Machine - Xerox WorkCentre 4250C User Manual

Feature
Power
Clear All (AC)
Interrupt Printing
Stop
Start
Dial Pause

Powering on the Machine

Xerox WorkCentre 4250/4260 User Guide
Description
Displays when the machine is in energy saver mode. Touch any
button or the touch screen to wake up the machine. Touching the
power button will bring up energy saver options on the touch
screen.
The Power button allows a user to instantly go into Energy Saver
(sleep) or Power Down from the options popup. If the machine is
powered down in this way it should be powered back up by
pressing the power button again.
Press to reset to normal copy and scan defaults.
Press to insert a local job.
Press to cancel current job.
Press to begin local job.
Enters a pause in a telephone number when transmitting a fax.
The On/Off switch and the power outlet are at the rear of the machine.
1. AC Power Cord
Connect the
cord must be plugged into a grounded power socket.
2. ON/OFF
Press the
I
to the ON ( ) position.
3.
To power OFF, press the
ON/OFF
switch again to
O
the ( ) position.
to the machine and a power outlet. The power
switch
ON/OFF
switch
AC Power
Outlet
2 Getting Started
25