Xerox WorkCentre 3315DN User Manual page 161

Option
Margin Shift
Edge Erase
(3325DN/DNI only)
4. Press the up/down arrows to highlight the option required and press OK.
5. Press the up/down arrows to highlight the setting required or enter the correct information using
the keypad.
6. Press OK to save the selection.
7. Continue customizing the Copy Defaults as required, then press Stop to return to Ready mode.
Scan Defaults
The Scan options, including File Format, Output Color and Resolution, can be set to those most
frequently used for the following scan services:
• Scan to USB
• Scan to FTP (3325DN/DNI only)
• Scan to SMB (3325DN/DNI only)
When you scan a document, the default settings are used unless they have been changed for the
current job.
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight Feature Defaults and press OK. If necessary, enter the
Administrator's Password using the keypad. Refer to
instructions.
3. Press the up/down arrows to highlight Scan Defaults and press OK.
4. Press the up/down arrows to highlight USB, FTP or SMB and press OK.
Description
Allows you to create a binding margin on the page. The
image can be adjusted up or down on the page and/or
shifted to the right or left. The Auto-Center option is
available for documents scanned from the document
glass and automatically places the image centrally on
the page.
Allows you to erase spots, drill holes, fold creases and
staple marks along any of the four edges of a
document. The Book Center option is available for
books scanned from the document glass and erases the
black horizontal line resulting from copying the spine of
the book.
Accessing the Setup Options
Xerox WorkCentre 3315DN/3325DN/3325DNI
Feature Defaults
Settings
*
• Off
• Auto-Center
• Custom Margin:
Left Margin, Right
Margin, Top Margin,
Bottom Margin
0-20 mm
*
• Off
• Small Original
• Hole Punch
• Book Center
• Border Erase
on page 154 for
161
User Guide