Fax Procedure - Xerox WorkCentre 3315DN User Manual

Fax Procedure

Fax Procedure

This section describes the basic procedure for sending faxes. Follow the steps below.
• Loading Documents
• Select the Features
• Enter the Fax Number
• Start the Job
• Check the Job Status
• Stop the Fax Job
• Fax Confirmation
If an authentication feature is enabled, you may need an account before using the machine. To get an
account, or for more information, contact the System Administrator.
Note: Refer to the
Loading Documents
Documents can be loaded either into the automatic document feeder or onto the document glass.
Automatic Document Feeder
The automatic document feeder can hold a maximum of 50 originals of 20 lb (80 g/m²) thickness.
1. Load documents to be scanned face up in the input tray
of the automatic document feeder with the top of the
document to the left of the tray.
2. Move the document guide to just touch both sides of the
document.
74 Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
on page 74
on page 75
on page 76
on page 76
on page 77
on page 77
on page 77
System Administrator Guide for information on setting up the Fax feature.