Printing Using Unix - Xerox WorkCentre 3315DN User Manual

Printing using Unix

Printing using Unix
Printing Files
After installing the printer, choose any of the image, text, PS to print.
1. Execute "printui <file_name_to_print>" command. For example, if you are printing "document1"
use printui document1 command.
This will open the UNIX Printer Driver Print Job Manager in which the user can select various print
options.
2. Select a printer that has already been added.
3. Select the printing options from the window such as Page Selection.
4. Select how many copies are needed in Number of Copies.
5. Press OK to start the print job.
Configuring Printer Properties
The UNIX printer driver Print Job Manager allows you to configure various print options using the
printer Properties option. The following hot keys may also be used: H for Help, O for OK, A for Apply,
and C for Cancel.
General Tab
• Paper Size: Set the paper size as A4, Letter, or other paper sizes, according to your requirements.
• Paper Type: Choose the type of the paper. Options available in the list box are Printer Default,
Plain, and Thick.
• Paper Source: Select from which tray the paper is used. By default, it is Auto Selection.
• Orientation: Select the direction in which information is printed on a page.
• Duplex: Print on both sides of paper to save paper.
• Multiple pages: Print several pages on one side of the paper.
• Page Border: Choose any of the border styles (e.g., Single-line hairline, Double-line hairline)
Image Tab
In this tab, you can change the brightness, resolution, or image position of your document.
Text Tab
Use this tab to set the character margin, line space, or the columns of the actual print output.
Margins Tab
• Use Margins: Set the margins for the document. By default, margins are not enabled. The user
can change the margin settings by changing the values in the respective fields. Set by default,
these values depend on the page size selected.
122 Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide