Option
Default Paper Size
Power Save
Wakeup Event
System Timeout
Job Timeout
Configuration Page
Altitude Adjustment
Auto Continue
Line Termination
Description
Use this option to set the default
size of paper.
Use this option to set the time
the machine waits before
entering Power Save mode.
Use this option to determine
what 'wakes' the machine up
from Power Save mode.
Sets the elapsed time before the
machine reverts to default
settings.
Sets the elapsed time before the
printing the last page of a print
job that does not end with a
command to print the page.
Enables a report detailing all the
machine settings to be printed.
The xerographic process used in
your machine to make prints is
affected by air pressure. Air
pressure is determined by the
height of the machine above sea
level. The machine will
automatically compensate for
differences in air pressure if you
enable the feature.
Determines whether or not the
machine continues printing
when it detects the paper does
not match the paper settings.
Sets the default line termination.
Xerox WorkCentre 3315DN/3325DN/3325DNI
System Setup
Settings
•
Letter *
•
A4
1 min *
•
•
5 Min
•
10 Min
•
15 Min
•
20 Min
•
30 Min
•
45 Min
•
60 Min
•
120 Min
Xerox WorkCentre 3315
•
Button Press On / Off*
•
Scanner
On* / Off
•
Printer
On / Off*
Xerox WorkCentre 3325
•
Button Press On / Off*
•
Scanner
On / Off*
•
Printer
On / Off*
•
15 Sec
•
30 Sec *
•
60 Sec
•
120 Sec
•
180 Sec
•
(15-300 sec) 15 *
•
On *
•
Off
•
Normal *
•
High 1
•
High 2
•
High 3
•
On *
•
Off
• LF *
• LF+CR
User Guide
171