Mc-802 Wireless Wallplate - Motorola 549478-001-00 - PowerBroadband EthernetXD M2a WallPlate Switch User Manual

System Description
M2 Ethernet WallPlate:
Physical
•
5"(mm) x 3.5" (mm) x 1.25" (32mm)
•
Operating Temperature: 0 - 40 degrees Celsius, 5% to 90% NC
•
Operating Power: approximately 2W, line powered by the T3 Switch
Interfaces
•
Uplink ports
One VDSL single wire pair port via RJ11 jack
o
•
Downlink ports
Two 10/100Mb autosensing, full duplex Ethernet port via RJ45 jack
o
One pass-through filtered phone port via RJ11 jack
o
Layer-2 Networking Features
•
802.1Q VLAN trunk ports
•
802.1Q PVID per port
•
QoS, 2 queues per port, port based classification
Management
•
Embedded Layer-1 channel for device management from T3 Switch
M C - 8 0 2 W i r e l e s
M C - 8 0 2 W i r e l e s
The MC-802 Wireless WallPlate has two 10/100Mb Ethernet ports, a pass-through RJ11 phone connector, and a
managed 802.11b/g radio. It is installed at the end-point where Ethernet and/or Wireless service is desired. It
operates over a standard 2-wire telephone line.
Features of the MC-802 802.11b/g radio:
Physical
•
6.625"(168mm) x 3.75" (95.25mm) x 1.75" (44.45). lbs (Kg)
•
Operating Temperature: 0 - 40 degrees Celsius, 5% to 90% NC
•
Operating Power: approximately 6W, line powered by the T3 Switch
Interfaces
•
Uplink ports
One VDSL single wire pair port via RJ11 jack
o
•
Downlink ports
Two 10/100Mb autosensing, full duplex Ethernet port via RJ45 jack
o
One 802.11b/g radio
o
One pass-through filtered phone port via RJ11 jack
o
Layer-2 Networking Features
•
802.1Q VLAN trunk ports
•
802.1Q PVID per port
•
QoS, 4 queues per port
Management
•
Embedded Layer-1 channel for device management from T3 Switch
•
Layer-3 IP addresses from private pool or public pool
•
All management centralized on T3 Switch
Motorola, Inc.
s W a l l P l a t e
s W a l l P l a t e
570510-001-00 rev A Page 13 of 50