Time Setting - IDTECK STAR 505R User Manual

STAR 505R
READER2 MODE
--> PIN

14.1.3 Time Setting

TIME SETTING
MM/DD hh:mm:ss
YYYYMMDDhhmmssW
_ _ _ _ _ _ _ _ _ _ _ _ _ _
14.1.4 Anti-Pass-Back Setup
APB SETUP
NOT USE
505R-20011128
Note: The relation between Reader1, Reader2
TIME SETTING
The lower line on the LCD indicates present time. To set time, press
<ENT> key.
Enter the correct information of the year, month, date, hour, minute,
second, day code in due order, then the setting is finished. If the input
information is out of range, an error message appears on the LCD and the
current time value is to be kept.
Day code 1 : Sun., 2 : Mon., 3 : Tue., 4 : Wed., 5 : Thu., 6 : Fri., 7 : Sat.
For example'200106071330253' for Tuesday, June 7, 2001 01:30:25PM.
APB SETUP
You can select whether the Anti-Pass-Back(APB) is used or not. The
lower line on the LCD indicates the current mode.
To change mode, press <ENT> key.
Reader1
1. RF only mode
2. RF only mode
3. RF + PW mode
4. RF + PW mode
5. PIN mode
15 digit + ENT
ENTER : YYYYMMDDhhmmssW
'ENT'
(15 digit) + 'ENT'
'ESC'
'ENT' NOT USE(DEFAULT)
SELECT KEY(4 or 6 keys)
SELECT KEY(4 or 6 keys)
23
ACCESS CONTROLLER
Reader2
RF only mode
RF + PW mode
RF only mode
RF + PW mode
PIN mode
USE
ALL CLEAR
ID TECK