Lcd Test - IDTECK STAR 505R User Manual

STAR 505R
OUTPUT TEST
OUTPUT
Press any key . . .

14.4.4 LCD TEST

LCD TEST
Last Update
Press any key . . .
14.4.5 Keypad TEST
KEYPAD TEST
0123456789ABCDEF
14.4.6 Readers TEST
READER TEST
505R-20011128
To test the output performances, press <ENT> key. If the output
performance has no problems, the test will proceed as follows:
First, the green LED blinks twice as the relay is being shorted and
opened twice. The relay makes a clicking sound as it runs. Second, the
yellow LED blinks twice as the relay is being shorted and opened twice.
The relay makes a clicking sound as it works. Third, the LCD changes
its figure, 'ON, OFF, ON, OFF'. Fourth, the buzzer beeps twice.
Note: The LCD provides no message to indicate if the test has finished
successfully.
This figure means that the test has finished. Press any key to return to
5
the setup menu. Use <4> or <6> key to scroll to perform other tests.
To test the performance of the LCD, press <ENT> key. As the test
proceeds several characters will move quickly from right to left.
This means the test has finished. Press any key to return to the setup
menu. Use <4> key and <6> key for testing other performances.
To test the performance of the keypad, press <ENT> key.
When operating normally, pressing the keys on the keypad will display
the corresponding letter on the LCD.
Note: For function keys, the letters A, B, C, D, E and F will refer to the
<F1>, <F2>, <F3>, <F4>, <ESC> and <ENT>key, respectively.
To test the performance of the reader, press <ENT> key.
41
ID TECK
ACCESS CONTROLLER