Setting Changes - IDTECK STAR 505R User Manual

STAR 505R

14. Setting Changes

NO
ERROR STATUS
NO
SETUP F1 MODE
1. READER1 MODE
2. READER2 MODE
3. TIME SETTTING
4. APB SETUP
5. COMM ID
6. BAUD RATE
7. EVENT CLEAR
8. MASTER ID CHANGE
9. SYSTEM INITIALIZE
10. CARD ID CLEAR
11. TIME SCHE CLEAR
12. RF_PIN_INPUT
13. EVENT MEMORY
14. DURESS MODE SET
To set or to change the STAR 505R's operation, enter the eight-digit Master number (factory
setting "00000000") <ENT>key, then you are ready to set or to change all the settings of the
controller. There are four main setup menus. You need to press <F1> key for setup menu F1,
<F2> key for setup menu F2, <F3> key for setup menu F3 and <F4> key for setup menu F4.
Note: You can change the Master number. (see 14.1.8)
505R-20011128
INITIAL DISPLAY
(MODEL NAME, CURRENT TIME)
ID INPUT ?
YES
MASTER ID ?
YES
SETUP MODE
SETUP F2 MODE
1. TIME SCHEDULE
2. HOLIDAY SETTING
3. IN/OUT DEFINE
4. HOLIDAY INDEX
5. MODE INDEX
To set or to change the STAR 505R access
controller's operation, enter the eight-digit
Master number (factory setting "00000000" )
or CARD.
Note You can change the Master ID. (see 14.1.8)
NO
OPERATE GENERAL MODE
SETUP F3 MODE
1. ID REGISTRATION
2. ID DELETE
3. ID LIST
4. REG. ID COUNT
5. ID COUNT
19
ID TECK
ACCESS CONTROLLER
Operation of Registered ID
Operation of Unregistered ID
Operation of Duress mode
SETUP F3 MODE
1. VERSION
2. SRAM TEST
3. OUTPUT TEST
4. LCD TEST
5. KEYPAD TEST
6. READER TEST
7. INPUT TEST
8. COMM TEST