IDTECK STAR 505R User Manual page 20

STAR 505R
14.1 Setup Menu F1
SEARCHING KEY
Note: There are four main setup menus. You need to press <F1> key for setup menu F1, <F2>
key for setup menu F2, <F3> key for setup menu F3 and <F4> key for setup menu F4.
The keys <4>, <6>, <2> and <8> are used to change submenus or to select values, <ENT> to
select and set, <ESC> to go to upper step or to leave setup mode. When selecting mode or
setting values is completed (as with all 4 main menus), the figure on the LCD returns to the first
figure of that menu. Then, for the next setting, use <4> and <6> keys.
505R-20011128
READER1 MODE
SELECTION
SEARCHING KEY(key <4> or <6>)
READER2 MODE
SELECTION
SEARCHING KEY(key <4> or <6>)
TIME SETTING
SEARCHING KEY(key <4> or <6>)
APB SETUP
SEARCHING KEY(key <4> or <6>)
COMM I D
SEARCHING KEY(key <4> or <6>)
BAUD RATE
SEARCHING KEY(key <4> or <6>)
RF+P/W( PassWord )
RF+P/W( PassWord )
15 digit key in
2 digit key in
9600(DEFAULT)
20
ID TECK
ACCESS CONTROLLER
RF Only
PIN
RF Only
PIN
NOT USE
USE
ALL CLEAR
4800
19200
38400