IDTECK STAR 505R User Manual page 29

STAR 505R
14.2.1 Registering and Changing Time Schedule
TIME SCHEDULE
TIME SCHEDULE
T/S : 01 HOL : 1
00:00 - 00:00
☞. Possible values for time scheduling
1) Time schedule number : 01 ~ 10 (Needed when IDs are registered)
2) A day of the week
3) Index
505R-20011128
'ENT'
NO
or ESC
You may program time schedules to grant and restrict access for each
user. There can be up to ten different schedules. A minimum of one
schedule must be defined. If only one schedule is programmed the most
common setting allows access for all users 24 hours / day. A time
schedule can be programmed for each day of the week and holidays (see
14.2.2 page 30), and five shifts can be defined for each day. To set time
schedules, press <ENT> key from this menu.
Press <2> key or <8> key to adjust the Time Schedule (T/S) number (1-
10) and the day of the week (Mon-Sun and 'HOL'). Define which shift of the
day (1-5), using the <4> key and <6> key. 'HOL' refers to specific holidays
you will register(see 14.2.2 page 30). Press <ENT>key, and the cursor will
blink, then enter the beginning time of the period, in the form of hour(2-
digit):minute(2-digit) and the ending time in the same form. Then the lower
line will indicate the defined period. For more schedules, repeat the process.
To end time scheduling, press <ESC> key.
: MON, TUE, WED, THU, FRI, SAT, SUN, HOL
: 1 ~ 5(referred to the five periods of time of a day)
DISPLAY CURRENT T/S
SELECT T/S NUMBER AND INDEX
(USE '2','8','4','6' KEY)
'ENT'
ENTER T/S(8 DIGIT)
(START TIME(hh:mm) -
END TIME(hh:mm))
NEXT?
29
ID TECK
ACCESS CONTROLLER
YES or Error