IDTECK STAR 505R User Manual page 25

STAR 505R
14.1.7 Clearing Event Data Buffer
EVENT CLEAR
EVENT CLEAR
1 - Yes , 0 - No
14.1.8 Changing Master ID
MASTER ID CHANGE
MASTER ID CHANGE
MASTER ID CHANGE
1: Card 2: Key
Scanning ...
XXXXXXXX
[ _ _ _ _]
MASTER ID CHANGE
[ _ _ _ _]
Master Card
Registered
505R-20011128
Used to erase ALL of the event data such as the permitted access and
denied access records. If you want to do so, press <ENT> key.
When this figure appears on the LCD, press <1> key to clear and <0> key
to cancel the operation.
CAUTION: Be careful in using this operation, or you may lose important
MASTER ID CHANGE
Press <ENT> key to change the current Master ID. You should use the
new Master ID to access the setup menu since the change is finished.
Master ID Number is registered in the controller by RF cards or through
the keypad. For RF cards, Press <1>key, the keypad, <2>key, or you can
quit the registration by pressing <ESC>key.
The reader is waiting for an RF card which is to be registered. The card
number will appear with a beep as the card is read. After recognition, the
next message will appear.
Enter a new Master password(four digit) and finish changing by pressing
<ENT> key.
This figure appears When you press the <2>key for through-keypad
registration, then you are to enter eight-digit number.
Eight digit ID : 00000000 ~ 99999999
The figure indicates that changing Master ID is finished successfully, and
soon , will return to the first figure of this menu. For the next setting, use <4>
and <6> keys.
.
data
'ENT'
KEY : ENTER NEW MASTER ID
(8 digit) + 'ENT'
25
ACCESS CONTROLLER
CARD
ID TECK