Date And Time Setting; Id Count Setting - IDTECK ITDC ITDCSR EIO88 User Manual

IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
4 Door Setting
Confirm the Reader and Exit Button locations as shown on the table below.
Note! This must be set-up first before other set-up.

8.4 DATE AND TIME SETTING

Select [TIME SETTING] in the [SETUP MENU F2] and enter the Year / Month / Date / hour / minute /
second / Day (Total 15 digits) as shown below. LCD will display the new Date and Time after the time
setting completed but year and day will not be displayed. iTDC has 24 hours system and day codes are 1
for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday and 7 for
Saturday. The Master ID for iTDC-SR is 10 digits number (Default setting "0000000000").
STAR iTDC [F1]
Initial Display
TIME SETTING
TIME SETTING

8.5 ID COUNT SETTING

iTDC can register maximum 20,000 User ID and you can select maximum User ID to be registered into the
iTDC from 1,000 up to 20,000 Users in 1,000 increments. This ID COUNT setting is to configure
maximum User ID to be registered into iTDC and if you set-up less ID COUNT then iTDC will increase
the EVENT Buffer size to maximum. The default ID COUNT is 5,000 Users and the default EVENT
Buffer size is 27,500 can be stored when you operate iTDC off-line.
101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)
Entry
Door1 Reader #1
Door2 Reader #2
Door3 Reader #3
Door4 Reader #4
"MASTER ID" + <ENT>
8 times <0> + <ENT>
<ENT>
"Year/Month/Day/Hour/Min./Sec./Day"
<ESC>
Exit
EXIT Button
EXIT Button
EXIT Button
EXIT Button
Select [
YYYYMMDDhhm
STAR iTDC
LCD displays after time setting
-34-
Press <F2>
TIME SETTING]
+ <ENT>
<ENT>
Users Manual