Table of Contents
Advertisement
1.1
Time Setting
The LCD displays the current time. To change the time, press <ENT>, enter 15 Digits in a "YY
YYMMDDhmmssW" format, and then enter <ENT> again to confirm.
NOTE: For the days of the week (W),
1 : Sun, 2 : Mon, 3 : Tue, 4 : Wed, 5 : Thu, 6 : Fri, 7 : Sat.
e.g. To input August 24, 2009, 13:30:15, Monday,
enter 200908241330152.
1.2
Communication Address
A communication address is a unique number assigned to each device for communication. T
he default address is 00.
For proper communication with the PC, it is important that the value you set here should ma
tch the value you set on the application software. It is also important to make sure each devi
ce on a loop has a unique address.
To change the communication address of the FINGER007, press <ENT>, enter the desired 2-
Digit address in the 00-31 range, and then press <ENT> again to confirm.
1.3
BAUD RATE
p.45
Setting Changes
Advertisement
Table of Contents
