IDTECK STAR 505R User Manual page 31

STAR 505R
14.2.3 Defining Outputs in Compliance with Inputs
IN/OUT DEFINE
or ESC
IN/OUT DEFINE
1. EXIT
03 00 00 00 00
505R-20011128
'ENT'
NO
You can program or deactivate each output to be generated and choose
how long (in seconds) they will last. There are default values as seen in the
table 1 below. To set the values, press <ENT> key.
Select input sources by changing index No. with the keys <4> and <6>,
and press <ENT> key, and you'll see a cursor blinking at the first digit, from
the left, of the five couples of digit, which corresponds to relay1, relay2,
TTL1, TTL2 and buzzer, respectively. Then enter the delay times(refer to the
table below) one by one. Now, an inputs/outputs definition has completed.
For further definition, repeat the process. To end defining inputs/outputs,
press <ESC> key, and you will see the first figure of the menu.
Note: The five couples of digit of [15] Output T/S and [16] Input/Output T/S
are time schedule indexes.
DISPLAY CURRENT SET
SELECT INDEX
(USE '4','6' KEY)
'ENT'
ENTER NEW TIME OR T/S INDEX
(10 DIGIT OR EVEN DIGIT + 'ENT')
NEXT?
31
ID TECK
ACCESS CONTROLLER
YES or Error