IDTECK STAR 505R User Manual page 36

STAR 505R
14.3.2 Deleting ID
ID DELETE
* END MESSAGE
1. UNREGISTERED ID
2. ID DELETE
ID DELETE
ID DELETE
1: Card, 2: Key
Scanning ...
Enter Card No.
-> _ _ _ _ _ _ _ _
ID Deleted
505R-20011128
'ENT' DELETION SELECT
( RF ONLY or RF +PW MODE : 8 digit
ID DELETION END
To delete some registered IDs, press <ENT> key.
ID Number is deleted in the controller by RF cards or through the keypad.
For RF cards, Press <1>key, the keypad, <2>key, or you can quit the
deletion by pressing <ESC>key. If reader mode is PIN mode, Press <2> key.
The reader is waiting for an RF card which is to be deleted. The card
number will appear with a beep as the card is read. You can quit the deletion
by pressing <ESC> key.
Enter the eight-digit(RF mode or RF +PW mode) ID number that you want
to delete. Then the following message will show on the LCD. You can quit the
deletion by pressing <ESC> key.
The display shows on the LCD for a second, indicating that the deletion is
finished successfully, and then waiting for a next RF card(ID number).
36
CARD or KEY ?
KEY
ENTER ID
PIN MODE : 4 ~ 6 digit )
INPUT
P/W, T/S, RD
ID TECK
ACCESS CONTROLLER
CARD PRESENT CARD