IDTECK STAR 505R User Manual page 24

STAR 505R
APB SETUP
--> NOT USE
APB SETUP
--> USE
14.1.5 Setting Communication ID
COMM ID SETTING
COMM ADDRESS
00
COMM ADDRESS
01
14.1.6 Adjusting Communication Speed
BAUD RATE
9600
BAUD RATE
--> 9600
BAUD RATE
-->19200
505R-20011128
Press <4> or <6> to toggle the between options NOT USE and USE.
Choose your selection by pressing the <ENT> key. After pressing enter,
you will be returned to the setup menu. Then, for the next setting, use <4>
and <6> keys.
Note: If you select All Clear, then system ignore all registered ID's APB flag
only once.
This is communication ID setting menu.
To change the ID, press <ENT> key.
The number on the LCD is the current communication ID(Device No.).
Press <ENT> key again to set a new communication ID.
When the cursor is blinking, enter a new ID(two-digit number), then the
setting is completed. For the next setting, use <4> and <6> keys.
Possible ID is between 00 - 31 inclusive.
The number on the LCD is the current communication speed in Baud
rate. Press <ENT> key to adjust the speed.
Available speeds are 4800bps, 9600bps and 19200bps and the default
value is 9600 bps. Press <4> or <6> to change speed, and finish selecting
by pressing <ENT> key.
Then, for the next setting, use <4> and <6> keys.
24
ID TECK
ACCESS CONTROLLER