IDTECK STAR 505R User Manual page 35

STAR 505R
14.3.1 Registering ID
ID REGISTRATION
ERROR DISPLAY
Invalid T/S 1
Invalid T/S 2
Invalid RD
ID REGISTRATION
Scanning ...
[_ _ _ _ _ _ _ _]
PW_ _ _ _ TS_ _ RD_
XXXXXXXX
ID Registered
ID Registered
505R-20011128
'ENT' DISPLAY REGISTRATION FORM
CARD or KEY ?
ENTER NEW ID
YES PW, TS, RD Error ?
ID REGISTRATION END
This is ID registration menu. To register additional IDs.
Press <ENT> key.
The reader is waiting for an RF card which is to be registered. The card
number will appear with a beep as the card is read.
PIN mode: Enter the 4 ~ 6 digit(PIN mode) ID number that you want to
register. Then the following message will show on the LCD.
The LCD's upper line shows the number read, and the lower line indicates
that the four-digit password, time schedule index and reader code are
needed. Enter those values, referring to the following information. Then the
registration of the card is finished, and the reader will be waiting for another
card, displaying the second menu of the menu. Press <ESC> key to end
registering IDs, then the first figure of the menu will appear.
1) PW(password) : the password used in RF + password mode.
2) TS(Time schedule) :
00
01 ~ 10
3) RD(Reader code) -
KEY
(4 ~ 6 digit ID)
'ENT'
INPUT
P/W, T/S, RD
NO
: Anytime accessible
: Accessible according to each T/S index
1 : for using reader 1 alone,
2 : for using reader 2 alone,
3 : for using both reader 1 and 2.
35
ID TECK
ACCESS CONTROLLER
CARD : RF ONLY OR RF + PW MODE
KEY : PIN MODE (4 ~ 6 DIGIT)
CARD PRESENT CARD