Table of Contents
Advertisement
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
10. SETTING CHANGES
SETUP MENU F1
1. READER 1 MODE
2. READER 2 MODE
3. READER 3 MODE
4. READER 4 MODE
5. DOOR 1 APB
6. DOOR 2 APB
7. READER1 KEY IN
8. READER2 KEY IN
9. READER3 KEY IN
10. READER4 KEY IN
11. READER1 DURESS
12. READER2 DURESS
13. READER3 DURESS
14. READER4 DURESS
15. READER1 T/S
16. READER2 T.S
17. READER3 T/S
18. READER4 T/S
☞. To set-up or to change the iTDC settings, you have to enter the SETUP MENU first. To do so,
press 8 times <0> key for Master ID (Default setting "00000000") and <ENT> key from the
optional Keypad then you can get into SETUP MENU. There are 4 main SETUP MENU and
you first get into [SETUP MENU F1]. You can move to other SETUP MENU by pressing
<F1> key for [SETUP MENU F1], <F2> key for [SETUP MENU F2], <F3> key for [SETUP
MENU F3] and <F4> key for [SETUP MENU F4]. There are several SUB MENU in the main
SETUP MENU and you can scroll up and down the SUB MENU by pressing <4> and <6> key
in the main SETUP MENU. If you don't press any key for 20 seconds or if you press <ESC>
key then iTDC will exit the SETUP MENU then return to normal operation.
The Master ID for iTDC-SR is 10 times <0> key (Default setting "0000000000").
101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR)
INITIAL DISPLAY
(MODEL NAME, CURRENT TIME)
NO
ID INPUT ?
YES
MASTER ID ?
YES
SETUP MENU
SETUP MENU F2
1. TIME SETTING
2. HOLIDAY INDEX
3. COMM ID
4. BAUD RATE
5. MASTER ID CHANGE
6. EVENT MEMORY
7. DOOR ALARM
8. DOOR SETTING
9. HOLIDAY SETTING
10. TIME SCHEDULE
11. IN/OUT DEFINE
12. READER DEFINE
13. SYSTEM INITIALIZE
14. EVENT CLEAR
15. CARD ID CLEAR
16. TIME SCHE CLEAR
NO
NORMAL OPERATION
MODE
SETUP MENU F3
1. ID REGISTRATION
2. ID DELETE
3. ID LIST
4. REG. ID COUNT
5. ID COUNT
6. EVENT COUNT
-38-
SETUP MENU F4
1. VERSION
2. SRAM TEST
3. OUTPUT TEST
4. LCD TEST
5. KEYPAD TEST
6. READER TEST
7. INPUT TEST
8. COMM TEST
Users Manual
Advertisement
Table of Contents
