Setting Changes; User's Manual - IDTECK Star Finger007 User Manual

9.

SETTING CHANGES

SETUP F1 MODE
1. MODE SELECTION
2. TIME SETTING
3. TYPE SELECTION
4. APB SETUP
5. COMM ID SETTING
6. DURESS MODE SET
7. BAUD RATE
8. EVENT CLEAR
9. MASTER ID CHANGE
10. SYS INITIALIZE
11. ID CLEAR
12. TIME SCHE CLEAR
13. RF_PIN_INPUT
. To setup or to change the FINGER007 settings, you have to enter the SETUP MENU first. To do so, input Master
ID(Default setting "00000000"), input Master P/W(Default setting "3141") and input Master Fingerprint then you can get
into SETUP MENU. There are 4 main SETUP MENU and you first get into [SETUP MENU F1]. You can move to other
SETUP MENU by pressing <F1> key for [SETUP MENU F1], <F2> key for [SETUP MENU F2], <F3> key for [SETUP
MENU F3] and <F4> key for [SETUP MENU F4]. There are several SUB MENU in the main SETUP MENU and you can
scroll up and down the SUB MENU by pressing <4> and <6> key in the main SETUP MENU. If you press <ESC> key
then FINGER007 will exit the SETUP MENU and return to normal operation.
The Master ID for FINGER007SR is 10 times <0> key(Default setting).
20030516
INITIAL DISPLAY
(MODEL NAME, CURRENT TIME)
NO
ID INPUT?
YES
MASTER ID /PW/
FINGERPRINT ?
YES
SETUP MODE
SETUP F2 MODE
1. TIME SCHEDULE
2. HOLIDAY T/S
3. IN/OUT DEFINE
4. HOLIDAY INDEX
5. MODE INDEX
6. LCD DISPLAY
7. OUTPUT TIME
NO
OPERATE GENERAL
MODE
SETUP F3 MODE
1. ID REGISTRATION
2. ID DELETE
3. ID LIST
4. ID COUNT
5. EVENT COUNT
STAR FINGER007
SETUP F4 MODE
1. F/W VERSION
2. SRAM TEST
3. OUTPUT TEST
4. LCD TEST
5. KEYPAD TEST
6. READER TEST
7. INPUT TEST
8. COMM TEST
9. GET GAIN IN FDA
10. SET GAIN IN FDA

User's Manual

26