Vertical Min. / Max. Venting Illustrations; Restrictor Installation - kozy heat Minnetonka-MTK 55345 Installation And Operation Manual

VERTICAL TERMINATIONS
MINIMUM VERTICAL VENTING
CAUTION: This gas appliance must not
be connected to or joined with any other
chimney flue serving another appliance.

RESTRICTOR INSTALLATION

TO BE USED AT INSTALLER DISCRETION.
Large Restrictor Remove tab (s) to create
small restrictor
NOTE: Page 51 has information on restrictor recommendations depending on burner flame
appearance and instructions on installation after venting is completed.
VENTING
TERMINATION CAP
2 ft."
(610 mm)
45° ELBOW
Bend tabs to approx. 80 degree
angles to create tension to hold
itself in place when installed.
(Vertical)
MAXIMUM VERTICAL VENTING
TERMINATION CAP
Slide restrictor into exhaust pipe on top of fireplace with
tabs pointing towards you prior to attaching venting.
PAGE 26
30 ft.
(9.14 m)
45° ELBOW