VERTICAL TERMINATIONS
MINIMUM VERTICAL VENTING
CAUTION: This gas appliance must not
be connected to or joined with any other
chimney flue serving another appliance.
RESTRICTOR INSTALLATION
TO BE USED AT INSTALLER DISCRETION.
Large Restrictor
NOTE: Page 50 has information on restrictor recommendations depending
on burner flame appearance and instructions on installation after venting is
completed.
TERMINATION CAP
2 ft."
(610 mm)
45° ELBOW
Remove tab (s) to create
small restrictor
VENTING
(Vertical)
TERMINATION CAP
Bend tabs to approx. 80 degree
angles to create tension to hold
itself in place when installed.
PAGE 25
MAXIMUM VERTICAL VENTING
30 ft.
(9.14 m)
Slide restrictor into exhaust pipe on top of fireplace with
tabs pointing towards you prior to attaching venting.
45° ELBOW