VERTICAL TERMINATIONS
MINIMUM VERTICAL VENTING
CAUTION: This gas appliance must not be connected to or
joined with any other chimney flue serving
another appliance.
RESTRICTOR INSTALLATION
TO BE USED AT INSTALLER DISCRETION.
Large Restrictor
Remove tab (s) to create
small restrictor
NOTE:
Page 65 has information on restrictor recommendations
depending on burner flame appearance and instructions on
installation after venting is completed.
VENTING
TERMINATION CAP
2 ft."
(610 mm)
45° ELBOW
Bend tabs to approx. 80 degree
angles to create tension to hold
itself in place when installed.
(Vertical)
MAXIMUM VERTICAL VENTING
TERMINATION CAP
Slide restrictor into exhaust pipe on top of fireplace with
tabs pointing towards you prior to attaching venting.
PAGE 27
30 ft.
(9.14 m)
45° ELBOW