2.3.5 Wiring for Main Circuit Terminals and Grounding Terminals
Follow the procedure below. Figure 2.3 illustrates the wiring procedure with peripheral equipment.
Wiring procedure
Grounding terminals
Inverter output terminals (U, V, and W)
DC reactor connection terminals (P1 and P(+)) *
Braking resistor connection terminals (P(+) and DB) *
DC link circuit terminals (P(+) and N(-)) *
Main circuit power input terminals (L1/R, L2/S and L3/T) or (L1/L and L2/N)
G
Figure 2.3 Wiring Procedure for Peripheral Equipment
*Perform wiring as necessary.
(This figure is a virtual representation.)
2-7