Table of Contents
Advertisement
3.8 Reading Maintenance Information--"Maintenance information"
Menu #5 "Maintenance information" in Programming mode contains information necessary for
performing maintenance on the inverter. Table 3.13 lists the maintenance information display items
and Figure 3.9 shows the status transition for maintenance information.
If you cannot switch the menu to any other one, set function code E52 data to 2 (Full-menu mode).
Basic key operations
(1) With the menu displayed, use the
5.CHE
(
).
(2) Press the
key to display the list of maintenance item codes (e.g.
(3) Use the
and
The data of the corresponding maintenance item will appear.
(4) Press the
key to return to the list of maintenance items. Press the
the menu.
Figure 3.9 "Maintenance Information" Status Transition
keys to select the desired maintenance item, then press the
and
keys to select "Maintenance information"
3-23
5_00
).
key.
key again to return to
Advertisement
Chapters
Table of Contents
