Table of Contents
Advertisement
3.6 Monitoring the Running Status--"Drive monitoring"
Menu #3 "Drive monitoring" is used to check the running status during maintenance and test run-
ning. The display items for "Drive monitoring" are listed in Table 3.6. Using keys, you may check
those items in succession. Figure 3.7 shows the status transition diagram for "Drive monitoring."
If you cannot switch the menu to any other one, set function code E52 data to 2 (Full-menu mode).
Basic key operation
(1) With the menu displayed, use the
(2) Press the
key to display the desired code in the monitoring items list (e.g.
(3) Use the
and
The running status information for the selected item will appear.
(4) Press the
key to return to the monitoring items list. Press the
menu.
Figure 3.7 "Drive Monitoring" Status Transition
and
keys to select the desired monitoring item, then press the
keys to select "Drive monitoring" (
3-16
3.oPE
).
3_00
).
key.
key again to return to the
Advertisement
Chapters
Table of Contents
