Frn0.75C1; Frn0.4C1; Frn3.7C1 - FujiFilm Frenic-Mini Instruction Manual

Chapter 10 APPLICATION OF DC REACTORS (DCRs)
If connected to a DC reactor specified in Table 10.1, the FRENIC-Mini series of inverters is
compliant with the "Japanese Guideline for Suppressing Harmonics in Home and General-purpose
Appliances" issued by Public Utilities Department, Agency of Natural Resources and Energy of
Japan in the Ministry of International Trade and Industry*, provided that the FRENIC-Mini operates
on: - three-phase 200 V or single-phase 100 V rated input; or
- single-phase 200 V rated input with 200 V power supply
Note that this guideline is to be used as a reference only for foreign markets.
Power Applicable
supply motor rating
voltage (kW)
0.1
0.2
0.4
Three-
phase 0.75
200 V
1.5
2.2
3.7
0.1
0.2
Single-
0.4
phase
0.75
200 V
1.5
2.2
0.1
Single-
0.2
phase
0.4
100 V
0.75
Note 1) A box ( ) in the above table replaces S or E depending on enclosure.
2) A box ( ) in the above table replaces A, C, E, or J depending on the shipping destination.
3) Asterisks (∗∗) in the above table replace numbers which denote the following:
21: Braking resistor built-in type, None: Standard models.
(1) For three-phase 200 V or single-phase 200 V
Table 10.1 List of DC Reactors (DCRs)
Applicable inverter type
FRN0.1C1 -2
FRN0.2C1 -2

FRN0.4C1 -2

FRN0.75C1 -2

FRN1.5C1 -2
FRN2.2C1 -2

FRN3.7C1 -2

FRN0.1C1 -7
FRN0.2C1 -7
FRN0.4C1 -7
FRN0.75C1 -7
FRN1.5C1 -7
FRN2.2C1 -7
FRN0.1C1 -6
FRN0.2C1 -6
FRN0.4C1 -6
FRN0.75C1 -6
Figure 10.1 Connection Diagram of DC Reactor (DCR)
(*Currently the Ministry of Economy, Trade and Industry)
DCR type
DCR2-0.2
DCR2-0.4
DCR2-0.75
** DCR2-1.5
** DCR2-2.2
** DCR2-3.7
DCR2-0.2
DCR2-0.4
DCR2-0.75
DCR2-1.5
DCR2-2.2
DCR2-3.7
DCR2-0.75
DCR2-1.5
DCR2-2.2
DCR2-3.7
(2) For single-phase 100 V
10-1
For connection
Refer to:
Figure 10.1 (1)
Figure 10.1 (2)