FujiFilm Frenic-Mini Instruction Manual page 116

Retry latency time (H05)
Sets the latency time for automatic exit from Alarm mode. Refer to the timing
scheme diagram below.
Operation timing chart
H07
Gradual Acceleration/Deceleration
Specifies the acceleration and deceleration patterns (output frequency patterns).
Linear acceleration/deceleration
The inverter runs the motor with the constant acceleration and deceleration.
S-curved acceleration/deceleration
To reduce
tion/deceleration, the inverter gradually accelerates/decelerates the motor in both
the acceleration/deceleration zones.
Curvilinear acceleration/deceleration
The inverter drives the motor to output maximum performance with a constant
loading rate as follows:
- In the zone under the base frequency, linear acceleration/deceleration of con-
stant torque output for the motor
- In the zone above the base frequency, speed two times the base frequency and
acceleration/deceleration half of the base frequency
the impact on the
5-43
inverter-driven motor during accelera-