Wiring For Main Circuit Terminals And Grounding Terminals; Wiring Procedure; Wiring Procedure For Peripheral Equipment - FujiFilm FVR-Micro Instruction Manual

2.3.5 Wiring for main circuit terminals and grounding terminals

Follow the procedure below. Figure 2.3 illustrates the wiring procedure with peripheral equipment.

Wiring procedure

① Grounding terminal
② Inverter output terminals (U, V, and W) and grounding terminal
③ Braking resistor connection terminals (P and DB)*
④ Main circuit power input terminals (L1/R, L2/S and L3/T) or (L1/L and L2/N)
1
*
2
*
1
G*
Use either one of these two grounding terminals on the main circuit terminal block.
Perform wiring as necessary.
Figure 2.3 Wiring Procedure for Peripheral Equipment
2
2-7
1
G*