(Note) Function codes E45 to E47 appear on the LED monitor; however, the FRENIC-Mini series of inverters does not recognize
these codes.
*1 Values in parentheses ( ) in the above table denote default settings for the EU version except the three-phase 200 V
series of inverters.
*2 "Fuji's standard torque boost," "Nominal rated current of Fuji's standard motor," and "Nominal rated capacity of Fuji's
standard motor" differ depending upon the rated input voltage and rated capacity. Refer to Table 5.1 "Fuji's Standard
Motor Parameters" on page 5-12.
5-6