FujiFilm Frenic-Mini Instruction Manual page 139

Check part
1) Check the ambient
Environment
temperature, humidity,
vibration and atmosphere
(dust, gas, oil mist, or water
drops).
2) Check if tools or other
foreign matter or dangerous
objects are left around the
equipment.
Check if the voltages of the
Voltage
main and control circuit are
correct.
1) Check if the display is clear.
Keypad
2) Check if there is missing
parts in the characters.
1) Abnormal noise and
Structure such
excessive vibration
as frame and
cover
2) Loosen bolts (tightened
parts)
3) Deformation and breakage
4) Discoloration and
deformation caused by
overheat
5) Check for foulness and dust.
Common 1) Check if bolts and screws
are tight and not missing.
2) Check the devices and
insulators for deformation,
cracks, breakage and
discoloration caused by
overheat and deterioration.
3) Check for foulness and dust.
1) Check the conductor for
Conductor
discoloration and distortion
and wire
caused by overheat.
2) Check the sheath of the
cable for cracks and
discoloration.
Terminal
Check that the terminals are not
block
damaged.
Table 7.1 List of Periodic Inspections
Check item
7-2
How to inspect
1) Check visually or
measure using
apparatus.
2) Visual inspection
Measure the
voltages using a
multimeter or the
like.
1), 2)
Visual inspection
1) Visual or hearing
inspection
2) Retighten.
3), 4), 5)
Visual inspection
1) Retighten.
2), 3)
Visual inspection
1), 2)
Visual inspection
Visual inspection
Evaluation criteria
1) The standard
specification must
be satisfied.
2) No foreign or
dangerous
objects are left.
The standard
specification must be
satisfied.
1), 2)
The display can
be read and there
is no fault.
1), 2), 3), 4), 5)
No abnormalities
1), 2), 3)
No abnormalities
1), 2)
No abnormalities
No abnormalities