External View And Terminal Blocks; Transportation - FujiFilm Frenic-Mini Instruction Manual

1.2 External View and Terminal Blocks

(1) External views
Keypad
(2) View of terminals
Heat
sink
(a) FRN0.75C1S-2

1.3 Transportation

• When carrying the inverter, always support its bottom at the front and rear sides with both hands.
Do not hold covers or individual parts only. You may drop the inverter or break it.
• Avoid applying excessively strong force to the terminal block covers as they are made of plastic
and are easily broken.
Main
nameplate
Control circuit
terminal bock cover
Figure 1.2 External Views of FRENIC-Mini
Barrier for the RS485
communications port*
Control signal cable port
DB, P1, P (+) and N (-) wire port
L1/R, L2/S, L3/T, U, V, W,
grounding wire port
L1/R, L2/S, L3/T, P1, P (+), N (-)
wire port
DB, U, V, W,
grounding wire
port
(* When connecting the RS485 communications cable, remove the control
circuit terminal block cover and cut off the barrier provided in it using nippers.)
Note: A box ( ) in the above model names replaces A, C, E, or J depending on
shipping destination.
Figure 1.3 Bottom View of FRENIC-Mini
1-2
Main circuit
terminal block
cover
Cooling
fan
(b) FRN1.5C1S-2
Control circuit
terminal block
cover
Sub
nameplate
Main
nameplate