Table of Contents
Advertisement
Basic key operation
This section will give a description of the basic key operation, following the example of the function
code data changing procedure shown in Figure 3.5.
This example shows you how to change function code F01 data from the factory default "Enable
the built-in potentiometer (F01 = 4)" to "Enable the
0)."
(1) With the menu displayed, use the
(In this example, select
(2) Press the
key to display the function codes in the function code group selected in (1). (In
this example, function code
Even if the function code list for a particular function code group is displayed, it is possible to
transfer the display to a different function code group using the
(3) Select the desired function code using the
example, select function code
The data of this function code will appear. (In this example, data
(4) Change the function code data using the
four times to change data
(5) Press the
key to establish the function code data.
SAUE
The
will appear and the data will be saved in the non-volatile memory. The display will
return to the function code list, then move to the next function code. (In this example,
Pressing the
key before the
to the previous value, the display returns to the function code list, and the original function
code reappears.
(6) Press the
key to return to the menu from the function code list.
Cursor movement: You may move the cursor when changing function code data by hold-
ing down the
tings. Refer to Section 3.3 (2) "Set up the Set Frequency and Others."
Figure 3.5 Example of Function Code Data Changing Procedure
and
1.F_ _
).
F 00
will appear.)
F 01
.)
4
0
to
.)
key cancels the change made to the data. The data reverts
key for 1 second or longer in the same way as with the frequency set-
3-14
and
keys on the built-in keypad (F01 =
keys to select the desired function code group.
and
and
keys and press the
4
of
and
keys. (In this example, press the
keys.
key. (In this
F 01
will appear.)
key
F 02
.)
Advertisement
Chapters
Table of Contents
