Mvr Configuration Example - ZyXEL Communications XGS2210-28 User Manual

Table 100 Advanced Application > Multicast > MVR > Group Configuration (continued)
LABEL
Delete
Cancel

24.5.2 MVR Configuration Example

The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN 1. In
addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the News and
Movie channels) from the remote streaming media server, S. Computers A, B and C in VLAN 1 are able
to receive the traffic.
Figure 186 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast VLAN in the MVR screen and set the
receiver and source ports.
Chapter 24 Multicast
DESCRIPTION
Select the entry(ies) that you want to remove, then click the Delete button to remove the
selected entry(ies) from the table.
If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.
Select Cancel to clear the checkbox(es) in the table.
XGS2210 Series User's Guide
247