Mvr Configuration Example - ZyXEL Communications GS2220 Series User Manual

24.5.2 MVR C o nfig ura tio n Exa m ple
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN 1. In
addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the
channels) from the remote streaming media server,
Mo vie
to receive the traffic.
Fig ure 186
To configure the MVR settings on the Switch, create a multicast VLAN in the
receiver and source ports.
Fig ure 187
To set the Switch to forward the multicast group traffic to the subscribers, configure multicast group
settings in the
multicast groups (
Chapter 24 Multicast

MVR Configuration Example

MVR Configuration Example
screen. The following figure shows an example where two IPv4
G ro up C o nfig ura tio n
and ) are configured for the multicast VLAN 200.
Ne ws Mo vie
GS2220 Series User's Guide
. Computers A, B and C in VLAN 1 are able
S
EXAMPLE
244
and
Ne ws
screen and set the
MVR