T5240 Servers; Integrated Lights Out Manager (Ilom) 3.0 Supplement For Sparc Enterprise T5140 And T5240 Servers - Fujitsu SPARC Enterprise T5140 Product Notes

Integrated Lights Out Manager (ILOM) 3.0
Supplement for SPARC Enterprise T5140
and T5240 Servers
Notes on "ILOM Information Stored on the SCC"
When transferring the SCC to the replacement server, keep the following note in mind.
Note – If the ILOM versions are different between the failed server and the replacement
server, the settings on the SCC(NVRAM) will be ignored or overwritten. If the ILOM
versions are the same, the settings will be retained.
Incorrect Description about Specifying powercycle
Option (CR 6881020)
When you specify the powercycle option indicated in "Specify System Behavior if Restart
Fails" on page 13, the power on/off is not executed, but the hardware reset is executed
forcibly.
-v Option for flashupdate Command (ALOM
CMT Command) (CR 6806268)
The description about the [-v] option for flashupdate command is missing in TABLE 3
"ALOM CMT Shell Status and Control Commands."
Even if you specify the -v option when executing the flashupdate command (ALOM
CMT command), the detailed information is not displayed. Also, specifying the -v option
does not affect update of the system firmware.
Chapter 4 Documentation Errata 61