Patch Information; Patch Cd - Fujitsu SPARC Enterprise T5140 Product Notes

Patch Information

For the information on how to get the patch releases, contact your sales representative.
Before contacting support, ensure that all mandatory patches are installed on your server.
To determine if a patch is present, see
Note – The mandatory patches might not be included in some versions of the preinstalled or
preloaded software on your server. If the patches are missing from your server, download
them from as described in

Patch CD

A patch CD (Operating System Patch Recovery CD for UltraSPARC T2 Plus Products, Only
for use with the Solaris 10 8/07 OS) has been shipped with your server.
TABLE 2-4
Patch ID
124235-02
125369-13
125416-06
125476-02
126434-05
127111-08
The CD has been provided for recovery purposes in case you chose to install the Solaris 10
8/07 OS. Install the patches on the CD if you decide to replace the installed OS with Solaris
10 8/07.
Note – The patches on the CD include an updated network driver that is required to enable
use of the network interfaces on the SPARC Enterprise T5140 and T5240 servers. After
installing the Solaris 10 8/07 OS and the patches, network interfaces will remain
unconfigured. You can configure the network interfaces by running the Solaris sys-
unconfig (1M) command or by configuring network options manually. See your Solaris 10
8/07 OS documentation.
10 SPARC Enterprise T5140 and T5240 Servers Product Notes • November 2012
"To Install Patches" on page
Patch CD Components
Description
libpam.so.1 patch
Fault Manager patch
UFS utilities patch
libc_psr_hwcap.so.1 patch
raidctl patch
Kernel patch
"To Install Patches" on page
12.
12.