Fujitsu SPARC Enterprise T5140 Product Notes page 61

Incorrect Operating Input Voltage Values for the 1.4
GHz, 8-Disk Configuration
The table that describes input power requirements for the SPARC Enterprise T5240 server
configuration with 1.4 GHz CPUs and an 8-disk capable backplane states the wrong
operating input voltage value in two places. The following table describes the necessary
correction.
Location of Incorrect Values
Table for T5240 Server, 1.4 GHz CPU, 8-disk backplane
Operating input voltage range
Maximum operating input power
Note – The operating input voltage range for the DC input model is correct.
Note – The 200 to 240 VAC operating input voltage range is required only for servers
equipped with 16-disk capable backplanes. All other configurations support the 100 to 240
VAC operating voltage range.
Incorrect Operating Input Power and Heat Dissipation
for the 1.4 GHz, 16-Disk Configuration
The table that describes input power requirements for the SPARC Enterprise T5240 server
configuration with 1.4 GHz CPUs and an 16-disk capable backplane states some wrong
values for DC input model. The following table describes the necessary correction.
Location of Incorrect Values
Table for T5240 Server, 1.4 GHz CPU, 16-disk backplane
Maximum operating input power
Maximum heat dissipation
Incorrect Value
200 to 240 VAC
At 200VAC 1161.1W
Incorrect Value
At -40 VDC: 1030.4 W
3857.23 BTU/hour
(3753.1 KJ/hour)
Chapter 4
Correct Value
100 to 240 VAC
At 100VAC 1161.1W
Correct Value
At -48 VDC: 1130.4 W
3857.1 BTU/hour
(4069.4 KJ/hour)
Documentation Errata 51