Fujitsu SPARC Enterprise T5140 Product Notes page 81

Procedure for Recovering a Boot Drive's "drive type" (Continued)
CODE EXAMPLE A-1
9. Verify the success of the recovery.
root@ # format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@0/pci@0/pci@2/scsi@0/sd@0,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
FORMAT MENU:
disk
type
partition - select (define) a partition table
current
format
repair
label
analyze
defect
backup
verify
save
inquiry
volname
!<cmd>
quit
format> partition
PARTITION MENU:
0 - change '0' partition
1 - change '1' partition
2 - change '2' partition
3 - change '3' partition
4 - change '4' partition
5 - change '5' partition
6 - change '6' partition
7 - change '7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
- select a disk
- select (define) a disk type
- describe the current disk
- format and analyze the disk
- repair a defective sector
- write label to the disk
- surface analysis
- defect list management
- search for backup labels
- read and display labels
- save new disk/partition definitions
- show vendor, product and revision
- set 8-character volume name The jumpstart install process
- execute <cmd>, then return
Appendix A Fixed Issues 71