Fujitsu SPARC Enterprise T5140 Product Notes page 109

On the DC Input Power Model, the "Environmental Status"
and Some Part of the "FRU Status" Information Is Not
Displayed (CR 6853843)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
On the DC input power model of SPARC Enterprise T5140 Server, when you execute the
prtdiag command of Solaris OS, the "Environmental Status" and some part of the "FRU
Status" information is not displayed.
Incomplete Data Output Example:
============================ Environmental Status ============================
<-- No data output.
============================ FRU Status ============================
Location
------------------------------------------------------
SYS
SYS
SYS
<-- Part of data is not on display.
Workaround: None. From ILOM, check the component information and the status of fan,
temperature, power sensor and so on.
In the Output from the prtdiag Command, Warnings May
Be Displayed (CR 6821325)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
In the output from the prtdiag command, warnings may be displayed for input voltage
sensors(V_IN_MAIN) on power supply units.
Voltage sensors:
------------------------------------------------------------
Location
------------------------------------------------------------
SYS/MB/CMP0/MR0
SYS/MB/CMP0/MR0
SYS/MB/CMP1/MR1
SYS/MB/CMP1/MR1
SYS/MB
SYS/MB
SYS/MB
SYS/MB
Name Status
MB enabled
HDD0 enabled
HDD1 enabled
Sensor
V_VMEM
V_+1V5_VDD
V_VMEM
V_+1V5_VDD
V_+3V3_STBY
V_+3V3_MAIN
V_+12V0_MAIN
V_VDDIO
Status
ok
ok
ok
ok
ok
ok
ok
ok
Appendix A Fixed Issues 99